A7V333 R1.01A · boot path

Unofficial reconstruction traced from the board view. Not affiliated with ASUS. May contain errors: check against the board before relying on it.

NET_NAME name of the wire, as in the board view ◯ TP53 bare test pad, the place to probe | +3V supply rail ▭ resistor or link, || capacitor, value above † from a standard pinout, not from the files Dashed tag: not fitted on this build, or continued elsewhere

Each line starts at the pin named in the box on the left and follows the wire through series parts until it ends at a chip, a connector or a rail. The left end is where the trace starts, which is not always the pin that drives the signal. Part outlines and pin functions of the ASUS custom chips (ASB100, ATXP2, AS007S) are unknown, so those pins carry the net name only.